 |
|
|
|
 |
|
|
|
|
|
Brace Height Recommendation
For checking the brace height on your Zipper, use the back of the shelf as the reference point. Each bow may be slightly
different. Here are the recommended brace heights.
The brace height for a Standard riser is 7 - 7-1/2".
For an Extreme riser it is 6"- 6-1/2".
Brace height for the SXT or S-Hunter is between 6-1/4" - 6-3/4".
For a ZSR or Z-Hunter it is 7" - 7-1/2"
Adjusting brace height
The brace height can be adjusted by twisting or untwisting the string.
To increase brace height leave the string on the top limb, twist the bottom of the string clockwise, 12 twists is usually 1" .
Restring the bow and measure the new brace height.
To shorten the brace height, twist the string counter-clockwise.
Arrow weights
We recommend at least 8 -10 grains per pound for arrow weight.
|
|
|
|
|
When unpacking your new Zipper
It is easy to tell the top limb from the bottom. The bottom limb is marked with a B on the flat part of the wedge on the limb pocket.
Carefully place both limbs on the bow. Then screw in the limb bolts. Do not over tighten, you can damage the fiberglass if too tight.
IMPORTANT > Always use a bow stringer when stringing or un-stringing your bow!
|
> Prices
Prices for limbs, riser and more
> Bow setup
New bow setup, brace height
and arrow recommendations
> Show Schedule
Come see us at a Trad Event
|
|
|
|
