About Our Risers
Each riser has custom finger grooves to fit your hand like a glove. Never again will you be searching for the right grip. You can choose
from straight or curved laminations. Our Standard and Extreme risers are 16", ZSR and SXT are 14", Elk horn is 14" or 16", and our new
ILF risers are 13", 15" or 17". Create your new riser from a variety of hardwoods. Check out the riser wood combo page if you are having
a hard time deciding. Antler overlays are also available on all Zipper risers. Our signature arrow inlay is also offered in all of our risers.

Shelf
The shelf of the Extreme and Standard and ILF risers are 3/16" past center. The SXT and ZSR are 1/8" past center.

Still have questions? Please contact us anytime! We look forward to hearing from you.
> Prices
Prices for limbs, riser and more

> Bow setup
New bow setup, brace height
and arrow recommendations

> Show Schedule
Come see us at a Trad Event
Standard & Extreme Risers
SXT & ZSR Risers
NEW Nitro Riser
ILF Risers
The Zipper Standard riser has stood the
test of time. While it has gone through a
few "face lifts" over the years, it is the
original Zipper riser.

The Zipper Extreme riser design allows
for a 1" less brace height, which in turn
creates a greater power stroke. This
riser was designed for the shorter draw
length, but can be used by anyone.

Finger grooves in both to set your hand
exactly where it needs to be.

  • Longbow or recurve limbs
  • 16" long - 4" site window
  • Shelf cut 3/16" past center

> In-stock bows
> Strung Profile
> Wood example combinations
The Zipper SXT and ZSR risers are by far
the most popular in the Zipper line.
Smaller, thinner more streamline they
were designed for the shorter draw length,
but can be used by anyone.

The SXT riser and its design allows for
less brace height, which in turn creates a
greater power stroke. The ZSR riser is an
inline riser which provides more shot
stability and accuracy.

Finger grooves in both to set your hand
exactly where it needs to be.

  • Longbow or recurve limbs
  • 14" long - 4" site window
  • Shelf cut 1/8" past center

> In-stock bows
> Strung Profile
> Wood example combinations
The Zipper Nitro riser is a brand new
design. It incorporates the best of the
SXT and ZSR risers into one. The limb
beds have less angle to them which
allows this long bow to be a top
performer.

Finger grooves in both to set your hand
exactly where it needs to be time after
time.

  • Longbow limbs only
  • 14" long - 3" site window
  • Shelf cut 3/16" past center

> In-stock bows
> Strung Profile
We are proud to release the newest
edition to the Zipper riser family; an ILF
riser with the Zipper flare! It's been a long
time coming, but we finally have it the way
we want it.

ILF risers are offered in 13", 15", or 17"
version of the Standard and Extreme
models and of course, fit any
manufacturers ILF limb. Custom order your
ILF riser with any of the exotic hardwoods
we offer.

Finger grooves to set your hand exactly
where it needs to be.

  • Longbow or recurve limbs
  • 13", 15", or 17" long
  • 3-4" site window
  • Shelf cut 3/16" past center

> Standard Strung Profile
> Extreme Strung Profile
> In-stock bows
> Wood example combinations
Copyright 2011 Zipper Manufacturing. All rights reserved.                                                                                                                                                                     WEBSITE DESIGN
Custom Risers